EN Laser Safety (U.S.) 179
Toner safety
Note In case of toner spills, skin and clothing are best cleaned by removing as much toner as possible with
a dry tissue, then washing with cold water. Hot water causes toner to permanently set into clothing.
Material data safety sheet
The Material Safety Data Sheet (MSDS) can be obtained by contacting the fax-on-demand service in
the HP LaserJet Supplies website at the following address:
http://www.hp.com/go/msds
If you do not have access to the internet, call U.S. HP FIRST at 1 (800) 231-9300 and follow the
recorded instructions.
For assistance outside the U.S. and Canada, contact your local HP sales and service office. See
“Technical Assistance” in Chapter 1 for telephone numbers.
Ozone emission
These printers do not use high-voltage corona wires in the electrophotographic process, and
therefore generate no measurable ozone gas (O
3
). The printers instead use charging rollers in the
toner cartridge and in the print engine.
Service.book Page 179 Thursday, September 14, 2000 11:15 AM
