A SERVICE OF

logo

Open as PDF
next previous
112 Removal and replacement EN
8 Lift the bottom plate, rotating the plate toward you from the back as if hinged on the front.
Release the Fusing Assembly connector (J206) (Figure 6-41, callout 1).
CAUTION ESD SENSITIVE!
Figure 6-41 DC Controller removal (2 of 3)
9 Remove the (7) remaining connectors (Figure 6-42, callout 1).
CAUTION Some wiring connections on the HP LaserJet 6L Pro are soldered. Check each connection before you
try to disconnect it to prevent breaking any soldered connections.
10 Remove the screws (5) that secure the DC Controller to the metal case (Figure 6-42, callout 2).
1
Service.book Page 112 Thursday, September 14, 2000 11:15 AM