Troubleshooting Tools 25
ENWW
Resetting to Factory Defaults
You can restore default values by performing a cold reset on your
printer (see your printer documentation for instructions). To
perform a cold reset on many HP LaserJet printers, turn off the
printer and then press and hold the Go button as you turn the
printer back on.
A document that describes how to perform a cold reset on many HP
printers is available on HP’s Web site. To view the document, visit
HP online support at:
http://www.hp.com/go/support
and search for document file hpj02300.html.
CAUTION A cold reset restores both your printer and
Jetdirect configuration to their factory
default values.
Controlling Network Protocols
The HP Jetdirect print server can simultaneously support multiple
network communication protocols. This allows network computers
that may be using different protocols to communicate with the same
printer.
Each protocol used on the print server may require some
configuration before the printer can communicate on the network.
For some protocols, required parameters are automatically sensed
and user-specified settings are not needed. However, for other
protocols, there may be many parameters to configure.
EIOSG.book Page 25 Thursday, October 9, 2003 1:42 PM
