If you are using photo paper with a tear-off tab, verify that the tab is pointing away
from the printer.
5. Slide the paper guide firmly against the edge of the paper stack.
1 Small photos
2 Large photos
Note Some panoramic paper sizes might extend beyond the edge of the
In tray.
6. Lower the Out tray.
Print
1. Open the Page Setup dialog box.
2. Choose the appropriate borderless paper size in the Paper Size menu, and then
click OK.
3. Open the Print dialog box.
4. Select the Paper Type/Quality pane, and then select the following settings:
– Paper Type: The appropriate photo paper type
– Quality: Best or Maximum dpi
5. Select the Real Life Digital Photography pane, and then set the HP Real Life
technologies as appropriate.
6. Select any other print settings that you want, and then click Print.
If you printed on photo paper that has a tear-off tab, remove the tab to make the
document completely borderless.
Chapter 5
18 HP Deskjet 5900 series
