8
English
installation troubleshooting
hardware
Use the information in this section if you have problems setting up your HP printer. If you
need help after the printer is set up, see the onscreen user’s guide.
what is the problem?
possible causes...
to solve the problem...
The calibration page does
not print.
There is no paper in the
paper tray.
The plastic tape is not
removed from a print
cartridge.
Confirm that the paper tray is loaded.
The top cover is not closed.
Close the top cover.
Press the
Power
button to turn the printer on.
The printer is not turned on.
If you have tried all of the above but the calibration page still does not print,
then send a print job to the printer. The calibration page will print after the
print job.
The print cartridges are not
installed.
Install print cartridges.
Pull the pink tab to remove the plastic tape
from the print cartridge.
#
