A SERVICE OF

logo

7. If the paper is wrapped around the fuser roller or stuck in the rollers, grasp the paper
by both corners and pull down.
Note If the paper is wrapped around the roller, it is important to pull down on the paper to remove it.
Pulling up on the paper can damage the fuser rollers and c ause p rint quality problems.
WARNING! Do not reach into the fuser until it has cooled.
Note If the paper tears, make sure that all paper fragments are removed from
the paper path before resuming printing.
8. Firmly push the two green levers on either side of the fuser to re-engage the fuser rollers.
9. Close the transfer unit and front cover.
EN_WW Clearing paper jams 153