Replacing supplies
Carefully follow the guidelines in this section when replacing printer supplies.
Locating supplies
Supplies are identified by labeling and blue plastic handles.
The following figure illustrates the location of each supply item.
Supply item locations
1 fuser
2 print cartridges
3 transfer unit
Supply replacement guidelines
To facilitate the replacement of supplies, keep the following guidelines in mind when setting
up the printer.
•
Sufficient space is required above and in the front of the printer for removing supplies.
•
The printer should be located on a flat, sturdy surface.
For instructions on installing supplies, see the installation guides provided with each supply
item or see more information at http://www.hp.com/support/lj5500. When you connect,
select Solve a Problem .
CAUTION Hewlett-Packard recommends the use of HP products in this printer. Use of
non-HP products may cause problems requiring service that is not covered by
the Hewlett-Packard warranty or service agreements.
108 Chapter 7 Maintenance EN_WW
