Graphic
The Graphic settings contain the following option:
● Image Color Management settings.
Image Color Management
This control lists the available Image Color Management (ICM) options used for printing
color graphics. ICM, a set of calculations for color matching, makes it possible for programs
to adjust colors before printing so that the color of images displayed on the screen more
closely match the color of images when printed. The following options are available:
● ICM Method. The ICM Method setting specifies how to print your color graphics.
● To enable Image Color Management, click on the option and then select ICM
Enabled.
● If you want the calculations for color matching to be performed on the host
computer before it sends the document to the product, click ICM Handled by Host
System.
● If you want the calculations for color matching to be performed on your product, click
ICM Handled by Printer. In this case, a set of rules for mapping the colors will be
created and downloaded to the product. The product will use these rules to adjust
colors in the document.
● If you want the calculations for color matching to be performed on your product, click
ICM Handled by Printer using printer calibration. In this case, the set of rules for
mapping the colors has already been downloaded to the product (which must be
postscript language level 2 or higher), so they will not be created or downloaded again.
● ICM Intent.The ICM Intent setting specifies how color images are created to produce the
best looking image on the printed page.
● If you are printing a chart or using fully saturated, bright colors, click Graphics.
● For photographs or pictures where the colors blend together, click Pictures to
maximize the contrast.
● If your document uses a color that you need to match exactly, and you are sending the
document to a product that has that specific color of ink, click Proof.
● If you want to preview the color settings from another product, click Match.
Document Options
The Document Options settings contain the following controls:
● Advanced Printing Features
● Color Printing Mode
● Print Optimizations
Advanced Printing Features
When the Advanced Printing Features setting is Enabled, metafile spooling is turned on and
Finishing tab options such as Page Order, Booklet Layout, and Pages per Sheet are
available, depending on your product. For normal printing, leave the Advanced Printing
Features setting at the default (Enabled). If compatibility problems occur, you can disable the
feature. However, some advanced printing features might still be available in the print driver,
even though they have been disabled. If you select an advanced printing feature in the print
driver that has been disabled on the Advanced tab, the feature is automatically re-enabled.
156 Advanced tab features EN
