Control panel
message
Description Recommended action
Ready
Diagnostics mode
alternates with
To exit press
Cancel Job key
The printer is online and ready for data. No
status or device attendance messages are
pending at the display.
No action necessary.
Ready The printer is online and ready for data. No
status or device attendance messages are
pending at the display.
No action necessary.
Receiving
upgrade
A firmware upgrade is in progress. Do not turn the printer off until the printer
returns to Ready.
RELOAD TRAY X
TRNSPRNCY
<SIZE>
alternates with
Verify transparency
meets specification
The transparency currently loaded might
not be supported.
CAUTION
Use only transparencies specified for use
with HP Color LaserJetprinters. Non-
compatible transparencies can damage
the printer. See the HP LaserJet Printer
Family Print Media Specification Guide.
1. Remove all non-compatible
transparencies from Tray X.
2. Load compatible transparencies in Tray
1.
REMOVE ALL
PRINT
CARTRIDGES
alternates with
To exit press
Cancel Job key
The printer is executing a Component Test. Remove all print cartridges.
After diagnostics are complete, reinstall all
print cartridges.
REMOVE AT
LEAST ONE
PRINT CARTRIDGE
alternates with
To exit press
Cancel Job key
The printer is executing a Disable
Cartridge Check or Component Test.
Remove one print cartridge.
After the test is complete, reinstall the print
cartridge.
REPLACE
<COLOR>
CARTRIDGE
alternates with
For help press ?
The identified print cartridge has reached
the end of life. Printing will not continue
until the cartridge is replaced.
Press ? for help.
REPLACE
<COLOR>
CARTRIDGE
alternates with
To continue press
the Select button on
the printer front
panel.
The identified print cartridge is nearing the
end of its useful life and the SUPPLIES
LOW setting in SYSTEM SETUP is set to
STOP. To override, press the Select
button on the printer front panel..
1. Order the identified print cartridge.
2. Press the Select button on the printer
front panel.to continue.
or
Press ? for help.
Software Technical Reference ENWW Technology background information 35
