Macintosh Readme
The following section includes the text of the Mac Readme, which is available on the HP LaserJet all-
in-one software CD-ROM for Macintosh.
Information about the hp LaserJet all-in-one software version 5.8
Edition 1, 5/2005
Contents
■ Supported HP Products
■ Supported Operating Systems
■ For OSX users only
■ For OS 9.2.2 users only
■ For more information
Supported HP Products
This software is intended for the HP Color LaserJet 2820/2830/2840 all-in-one products and should be
used only for those products.
Supported Operating Systems
This software is designed for Apple computers using one of the following Macintosh operating systems:
OS 9.2.2, or OSX versions 10.2.8 or 10.3.x.
For OSX Users Only
The HP scan application does not support the Quit selection on the application menu. To close the HP
scan application, choose the Done button on the application's user interface window.
For reliable print function on OS 10.2.8 and OS 10.3.0 through OS 10.3.7 systems, the HP LaserJet
software must be installed.
On some older versions of Safari, the Device Configuration frame sometimes fails to fully load. To work
around this issue, use the Safari page refresh feature or upgrade to a newer Safari version.
How to Configure a Print or Fax Queue
It is recommended the HP all-in-one Setup Assistant application be used to add print and fax queues.
However, it is also possible to configure such queues manually by performing the following steps after
the software has been installed.
To configure a print queue for your HP LaserJet all-in-one
1 Open Print Center from <disk>/Applications/Utilities/Print Center.
2 Click Add.
3 Select HP AiO USB in the drop-down box. Do not select USB from the drop-down box.
ENWW
Readme
349
Engineering details
