A SERVICE OF

logo

Figure 6-79 IP Configuration screen
The IP Configuration screen shows the host name and domain of the device. By default, the device
uses automatic IP configuration and DNS Server. Use this screen to configure the TCP/IP address and
DNS Server manually.
The following IP Address Configuration options are available:
Automatic IP. This option is selected by default. It causes the device to obtain a TCP/IP address
from a Dynamic Host Configuration Protocol (DHCP) server, BOOTP server, or AUTOIP.
Manual IP. Select Manual IP to manually specify an Internet Protocol (IP) address (also known as
a static IP address). If you select this option, you must specify an IP address in the IP address,
Subnet mask, and Default gateway fields.
278 Chapter 6 The HP Toolbox ENWW
The HP Toolbox