Figure 4-14 First Page, Other Pages, and Last Page options
The First Page, Other Pages, and Last Page options are as follows:
■ Size is: drop-down menu
■ Source is: drop-down menu
■ Type is: drop-down menu
The Size is: driver setting for the first page applies to the entire print job. When this is set, the setting
becomes unavailable for all the other Use Different Paper/Covers options.
Source Is: drop-down menu
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the printer accessories. Any optional source trays that are installed through the
Configure tab also appear here.
The Source is: drop-down menu can contain the following options:
■ Auto select
■ Manual Feed in Tray 1
■ Tray 1 (125-sheet multipurpose tray)
■ Tray 2 (250-sheet tray; optional for the HP Color LaserJet 2820 and HP Color LaserJet 2830)
The default setting is Auto select. When this setting is selected, the printer uses the source tray that
supports the media size that you have selected. If you select a source tray other than Auto select, make
sure that the correct media size is loaded in the source tray.
For information about media sources, see the
Media attributes section of this guide.
ENWW
HP Traditional PCL 6 Driver features (for Windows 98 SE and Windows Me)
129
Windows HP traditional
driver features
