Using printer information pages
From the printer control panel, you can print pages that give details about the printer and its current
configuration. The table below provides the procedures for printing the information pages.
Page description How to print the page
Menu structure
Shows the control-panel menus and
available settings.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. If Menu structure is not highlighted, press < or > until it is highlighted, and then
press OK.
For a complete list of control panel menus and possible values, see
Using the control-
panel menus.
Configuration page
Shows printer settings and installed
accessories.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. Press > to highlight Config report, and then press OK.
Supplies status
Shows print-cartridge toner levels.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. Press > to highlight Supplies status, and then press OK.
NOTE If you are using non-HP supplies, the supplies status page might not
show the remaining life for those supplies. For more information, see
Non-
HP print cartridges.
Demo page
Shows a color page that you can use to
check print quality.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. Press > to highlight Demo page, and then press OK.
Network page (HP Color LaserJet
2700n printer only)
Shows the printer network settings.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. Press > to highlight Network report, and then press OK.
Usage page
Lists PCL pages, PCL 6 pages, PS
pages, pages that were jammed or
mispicked in the printer, monochrome
(black and white) or color pages; and
reports the page count.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. Press > to highlight Usage page, and then press OK.
Color usage log
Shows color usage information for the
printer.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. Press > to highlight Color usage log, and then press OK.
PCL font list
Shows which PCL fonts are currently
installed in the printer.
1. Press OK.
2. Press > to highlight Reports, and then press OK.
3. Press > to highlight PCL font list, and then press OK.
58 Chapter 5 Managing the printer ENWW
