Signal Strength Signal Strength
0 to 100 [%]
TCP/IP Version
TCP/IP Version
IPv4/IPv6
IP Address Selected IP Address
Default Gateway Default Gateway
Subnet Mask*1 Subnet Mask
Subnet Prefix
Length*2
Subnet Prefix Length
IPsec*3
IPsec setting
Security Protocol*3
Method of the Security
Protocol
ESP/ESP & AH/AH
Wired LAN Wired LAN
Enable/Disable
Link Status
Status of the Wired LAN
Active/Inactive
MAC Address
MAC Address
TCP/IP Version
TCP/IP Version
IPv4/IPv6
IP Address IP Address
Default Gateway Default Gateway
Subnet Mask*1 Subnet Mask
Subnet Prefix
Length*2
Subnet Prefix Length
IPsec*3
IPsec setting
Security Protocol*3
Method of the Security
Protocol
ESP/ESP & AH/AH
Printer Name Printer name
Printer name (Up to 15 characters)
Shared Memory Card Memory card sharing
Enable/Disable
WSD
WSD setting Enable/Disable
WSD Timeout
Timeout
1/5/10/15/20 [min]
LLTD
LLTD setting
Enable/Disable
LPR Protocol
LPR protocol setting
Enable/Disable
Bonjour Bonjour setting Enable/Disable
Bonjour Service
Name
Bonjour service name
Bonjour service name (Up to 48 characters)
Bonjour LPR Service Bonjour LPR service
advertising
Enable/Disable
IP Address Filtering IP Address Filtering
Enable/Disable
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
*1 Only when IPv4 is selected on IPv4/IPv6 setting, the status of the network is printed.
*2 Only when IPv6 is selected on IPv4/IPv6 setting, the status of the network is printed.
*3 Only when IPv6 is selected on IPv4/IPv6 setting and Active is selected on IPsec settings, the
status of the network is printed.
For MG5200 series
Item
Explanations of the item Setting
Wireless LAN Wireless LAN
Enable/Disable
Link Status
Status of the Wireless LAN
Active/Inactive
MAC Address
MAC Address
SSID SSID
SSID of the wireless LAN
Connection Mode Connection Mode Infrastructure
Channel Channel
Encryption
Method of the Encryption none/WEP/TKIP/AES
WEP Key Length WEP Key Length
Inactive/128/64
Page 998 of 1037 pagesPrinting Out Network Setting Information
