Taking Photos
Once your Digital CD-ROM software is installed, you’re ready to learn about taking photos.
Holding the Camera
Hold the camera as shown below when taking photos.
• The camera will turn on once batteries are installed.
• A beep sound will play and the LCD panel will turn on indicating the camera is on.
• The LCD will show the capture mode first then skip to the frame counter .
The information shown below appears on the LCD panel
: Activate High Resolution Mode (VGA) from Low Resolution Mode
"FINE" Icon will display
: Frame counter - Max. number of available shots in FINE mode
: Continuous Mode - taking photos continuously in FINE mode
: Self-timer - 10 seconds in FINE mode
: Clear all the photos included all the high resolution and the low resolution photos.
: Activate Low Resolution Mode (QVGA) from High Resolution Mode, "BASIC" Icon
will display.
: Frame counter - Max. number of available shots in BASIC mode.
: Continuous mode - taking photos continuously in BASIC mode.
: Self-timer - 10 seconds in BASIC mode.
: Clear all the photos included all the high resolution and the low resolution photos.
Digital Camera User Guide
5
