14
Note: The front LED light will blink red during the 10 second period
5. HALF / FULL: Indicate image resolution. See Buttons Description RES.
6. Rapid Fire: Take 3 continuous photos
• To activate Rapid Fire, turn Mode Dial to Record Mode
• Press the RES button until Rapid Fire icon appear on the status
LCD display.
• Press the Shutter button, you can take 3 continuous photos
Note: This function is available in resolution FULL* and HALF* only.
We recommend to de-activated the flash while using Rapid Fire
function due to the time required to re-charge the flash between photos.
Front LED indication :
Blinking : Self-timer is started
Off : Self-timer is not in use.
Default settings
Note: These are set upon installing batteries to power on the camera
Flash : Off
Resolution : FULL*
LCD monitor : Off
LCD Brightness : 0
Quick View : Off
White Balance : Auto
EV Compensate : 0
Light Frequency : 60Hz
Video : NTSC
Slide show : 3-second delay
Folder : 100 01.01.00
Date/Time : 01/01/00 12:00
Language : English
Sound : Off
Auto Power Off : 1 minute
(For detailed settings please refer to the User’s Manual)
How to view the images
1. Playback on LCD Monitor
• Turn Mode Dial to Play mode, the last photo taken will be
displayed.
• See LCD Monitor Menu in Play Mode
2. Download to the Computer
• Don't connect camera to PC before drivers are installed. See Page17 to
25 Install camera drivers and software
• Be sure to save photos in the camera or CF card
