User's Guide 33
Command Set for the PPLB
All PPLB commands must end with <LF> or <CR>+<LF> codes. No spaces are allowed between
parameters and leading command character.
Command Description Parameter
Ax,y,rot,font,hm,vm,nr,string Print text. font: 1to 5 for internal font and A to Z
for soft font.
Bx,y,rot,bar,nw,ww,v,hum,string Print Bar Code.
bar: barcode
selection
nw: width of narrow bar
ww: width of wide bar
v: bar code height
hum: B for printing readable code
and N for disabling.
bx,y,type,[…] Print 2D Bar Code type: M for Maxi code and P for PDF
417
Ccn,dn,just,step,string Counter declaration cn: counter index
dn: digit number
just: L,R,C and N for field justification
step: step value
Dp1 Heat setting p1: density, 0 to 15
EI Print soft font
names
EKstring Delete soft font string: soft font name or “*” to delete
all soft fonts
ESstring,…. Download soft font
FE End form store
FI Print form names
FKstring Delete form string: form name or “*” to delete all
forms
FSstring Execute form string: form name
FSstring Save form string: form name
GGx,y,string Print graphics string: graphic name
GI Print graphic list
GKstring Delete graphics string: graphic name or “*” to delete
all graphics
GMstring,size<LF>… Store graphics string: graphic name
size: graphic size in bytes
