The cv joint under the driver side were the shock is got pulled apart how would I go about fixing it?

Asked by lindsey on 12/01/2013 1  Answer

ManualsOnline posted an answer 10 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 REMOVE your whelland tire on the side that you want to make to fix, removed your brake caliper and attach it with a piece of wire to the suspention strut ,remove the part that hold the caliper,remove the bolt or the nut that hold the lower balljoint in your lower suspention arm to your stering kuckle,and separate those two parts with a long pry-bar or a suspention fork and hammer,remove your disc brake,loose the spindle nut from the axle(this big nut is in the center of whell and if you are not working witch an air impact tool loose it right after removing your whell cap before removing the whell this is a high torque on it be sure to tight it correcly when yuo ins tall it)and pull the suspension strut foward you to removed the axle from the stering kuckle take apry-bar put it betwen the transmission and axle and pry it out some trans mission fluid may leak installation is reverse.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.