1. Manuals
  2. Automotive Support
  3. Code Alarm Support
  4. Automobile Alarm Support
Support User Manuals
Question About Code Alarm Automobile Alarm CA100
vehicle alarm...

My new code alarm does not chirp of make a sound whenever I press the lock or unlock buttons. I want the alarm to chirp so I will know when I engage or disengage the lock without looking at the flashing lights.

Asked by TROY on 05/18/2010 3  Answers

ManualsOnline posted an answer 14 years, 6 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Vic posted an answer 14 years, 6 months ago

0 1- turn the ignition switch ON/OFF 3 times and stay in OFF position after the last 2 Push the valet switch 2 times and holding in on 2nd push until one chirp with one long chirp is heard then releases the valet switch 3 Press and release the lock botton from the transmitter (remote) and it will chip one 4 Now your car alarm is in chirp mode, wait for 15 seconds and then you'll hear 3 long chirp to confirm the programs is done.
Was this answer helpful?

Vic posted an answer 14 years, 6 months ago

0 1- turn the ignition switch ON/OFF 3 times and stay in OFF position after the last 2 Push the valet switch 2 times and holding in on 2nd push until one chirp with one long chirp is heard then releases the valet switch 3 Press and release the lock botton from the transmitter (remote) and it will chip one 4 Now your car alarm is in chirp mode, wait for 15 seconds and then you'll hear 3 long chirp to confirm the programs is done.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual