Volvo XC90 Automobile User Manual


 
2007 Volvo XC90
- Choose a frequency band with the AM/ FM button.
- Press and hold down the AUTO button (2) until AUTOSTORING is shown in the display.
When AUTOSTORING is no longer displayed, the autostore process is complete. If there are no stations
with sufficient signal strength, NO AST FOUND is displayed.
Stopping autostore
- Press EXIT.
Selecting an autostored station
- Press AUTO (2) briefly. AUTO will be displayed.
- Press one of the preset buttons.
The radio will remain in Autostore mode until AUTO, EXIT, or AM/FM is pressed.
SCAN
This function automatically searches the currently selected waveband (AM, FM1, or FM2) for strong
stations. When the radio finds a station, it will pause for approximately 8 seconds, after which it will
continue scanning.
Activating/deactivating Scan
- Choose a waveband by pressing the AM/ FM button.
- Press SCAN (1). SCAN will be shown in the display.
- Press EXIT to stop scanning.
Storing a station found by SCAN
Stations can be stored on the preset buttons while the SCAN function is activated.
- Press a preset button and hold it down until Station stored is displayed.
- This deactivates SCAN and the stored station can be selected by pressing the preset button.
Radio text
Certain stations broadcast program information, which can be shown in the display.
- Press the MENU button.
- Select RADIOTEXT in the menu and press ENTER.
Select RADIOTEXT again to deactivate.
pg. 229 Audio
Sirius satellite radio (option or retailer-installed accessory)
Listening to satellite radio
file:///K|/ownersdocs/2007/2007_XC90/07xc90_11.htm (12 of 26)12/30/2006 5:53:54 PM