Filter
Top Products
1993 Volvo 960
pg. 6:5 Replacing bulbs
NOTE!
The method for replacement of bulbs in the various lighting units is shown on the following pages.
Make sure when installing bulbs, that the guide pin on the socket fits into its corresponding recess.
When installing Halogen bulbs, do not touch the glass with your fingers because grease, oil or any
other impurities can be carbonized onto the bulb and damage the reflector.
Use bulbs of correct type and voltage. Failure to do so could cause the bulb failure warning light to
activate.
Headlamps
1 Pull the connector out.
2 Loosen the ring by turning it counter-clockwise.
3 Pull the bulb straight out.
4 Replace the bulb and reinstall the unit in the reverse order.
Bulb Power US Bulb No.
Headlamp (45/65) HB1/9004
Turn signal/parking light/side marker light
1 To remove, turn the lamp holder 1/4 turn counter-clockwise.
2 Press the bulb in and turn it 1/4 turn counter-clockwise.
3 Replace the bulb and reinstall the unit in the reverse order.
file:///K|/ownersdocs/1993/1993_960/93960_6_5.html (1 of 13)12/30/2006 9:47:09 AM