Tonka 6918670002 Automobile User Manual


 
POWER SWITCHES
®
TM
AGES 3+
93957/93956 Asst.
Thank you for purchasing
this CHUCK MY TALKING
TRUCK
TM
vehicle
.
Be sure to read and follow all
instructions carefully before
playing with your vehicle.
INCLUDES:
truck, storybook and instructions.
Replace with 3 x 1.5V “C” or LR14 size alkaline batteries.
Phillips/cross head screwdriver (not included) needed to
replace batteries.
x3
BATTERIES INCLUDED
CHUCK MY TALKING TRUCK
TM
There are two slide switches that turn your vehicle ON and OFF.
Your CHUCK MY TALKING TRUCK
TM
vehicle is packaged in
“TRY ME” mode. To activate the full range of play features:
ON OFF TRY ME
ON
OFF
Move (A) to the ON
position to play.
A
Move (B) to the
ON position for
Sound Activation.
B
If your vehicle bumps into something while in
Sound Activation mode, he will stop moving and make a noise.
PLAY FEATURES
Your CHUCK MY TALKING TRUCK
TM
vehicle has 4 sensors.
When a sensor is activated, he makes a sound, says a phrase,
wiggles his dump bed and moves his front bumper.
1
Press cab lights.
2
Lift up dump bed all the way.
3
Press
front bumper.
4
Roll him forward
or backward.
SOUND ACTIVATION
Turn ON the sound activation
switch (B) . When you call
to your CHUCK MY TALKING
TRUCK
TM
vehicle or make a
loud sound, he will honk his
horn, and then drive forward.
Unintentional loud sounds from
televisions, radios and people
in close proximity to the
vehicle may cause the vehicle
to respond.
Turn OFF the sound activation
feature by sliding switch (B)
to OFF.
ON OFF TRY ME
ON
OFF
TROUBLESHOOTING
If your CHUCK MY TALKING TRUCK
TM
vehicle does not
respond, move power switches to OFF, then ON.
Or, replace the batteries.
If you stop playing with your vehicle for 20 seconds,
he will say “bye” and turn off. Activate any of his sensors to turn
him back on.