Solo USA R D - 5 1 1 0 Radar Detector User Manual


 
5 AUDIBLE ALERTS
For Radar and Laser signals:
SOLO uses a geiger-
counter-like sound to indicate the signal strength and type of radar or
laser signal being encountered. When you encounter radar or laser, a
distinct Audible Alert will sound and occur faster as the signal gets
stronger. When the signal is very strong, the Audible Alerts will blend
into a solid tone. This allows you to judge the distance from the signal
source without taking your eyes from the road. Each band has a
distinct tone for easy identification. X-band = beep tone, K-band =
raspy brap tone, Ka-band = double-bleep tone, Laser = chirp tone.
Please see page 12 for details on the typical behavior of various radar
and laser signals.
For Safety signals:
Each type of safety signal has its own distinctive
brap tone. Emergency Vehicle = rapid braps, Railroad Crossing =
repetitive brap, Road Hazard = repetitive double brap. THE PRESENCE
OF ONE OF THESE SIGNALS INDICATES A DANGEROUS DRIVING
CONDITION. Be particularly alert and aware of what’s going on
around you.
(For more information on SOLO’s SafetyPilot
TM
and the
use of Safety transmitters, please see page 15.)
6 POWER-ON INDICATOR When your SOLO is turned on, the Power-On
Indicator will illuminate.
7 CITY INDICATOR The City Indicator will light whenever City mode is
selected.
8 BAND INDICATORS When a radar or laser signal is detected, the
appropriate Band Indicator will light to show which type of signal is
being detected; “X” for X-band, “K” for K-band, “Ka” for Ka-band or
“L” for laser.
9 SIGNAL METER The Signal Meter consists of 5 red LEDs and provides the
following information.
Signal Strength:
The more meter lights lit during a radar or laser
encounter, the stronger and closer the signal.
Type of Safety Signal:
Safety Signals are displayed as shown below.
E
MERGENCY
V
EHICLE
Signal Meter scans quickly from right to left.
R
OAD
H
AZARD
All Signal Meter lights double-flash simultaneously.
R
AILROAD
First two Signal Meter Lights alternate flashing with last two Signal Meter Lights.
C O N T R O L S A N D I N D I C A T O R S
6
C
ONTROLS
AND
I
NDICATORS