Scytek electronic G40RS Remote Starter User Manual


 
Page 4 - G 40RS
Remote Locking
To Lock the doors:
1. Turn off the ignition.
2. Press Button 1.
· The doors will lock.
· The parking lights will flash once.
· The LED will turn on, to indicate the doors are locked.
3. 10 seconds after Locking:
· The LED will start blinking.
Remote Unlocking
To Unlock the doors:
Press Button 2.
· The doors will unlock.
· The parking lights will flash twice.
· The LED will turn off .
Remote Starting Automatic Transmission Mode
To Remote Start the System:
1. Be sure the system is not in Valet Mode.
2. Press and hold Button 4
· The parking lights will flash twice.
· The doors will lock (programmable)
· The engine will start and run for the duration of its programmed Run Time.
· The heater or air conditioner will turn on (if turned on prior to exiting the vehicle).
To resume control of the vehicle:
1. Unlock the doors manually or with the Transmitter.
2. Turn on the ignition.
3. Press the Brake Pedal to disengage the remote start.
Visual Car Locator Mode
Use this feature to locate your vehicle in a crowded parking lot. Look for the flashing parking lights
which should be your vehicle!
To activate the Visual Car Locator Mode:
1. Press and hold Button 1 for 3 seconds.
· The parking lights will flash.
· The doors will unlock allowing access to the vehicle.
2. Press Button 2 to turn off Car Finder.
System
Operation