Filter
Top Products
Lab Test Report
Samsung CLP-670ND
BUYERS LAB
BUYERS LAB
5
BuyersLab.com
© 2010 Buyers Laboratory Inc. Duplication in any manner is illegal and strictly forbidden without written permission
from Buyers Laboratory. Violators will be prosecuted. To purchase reprints, contact BLI at info@buyerslab.com.
Smart Panel allows users to see device status and toner levels,
and access the manual. (U.S. model pictured)
When an error message pops up, users can access the trouble-
shooting guide to rectify the issue. (U.S. model pictured)
Via the embedded Web page, administrators can configure e-mail alerts that can be
sent to three users—SysAdmin, Key User and Service—for consumables shortage
warnings and when the unit is unable to print due to a misfeed, the cover being open
or service being required.
EASE OF NETWORK SETUP VERY GOOD
Physical setup of the CLP-670ND is straightforward. Samsung recommends two
people lift the main body of the unit, which stacks on top of the optional drawer, out
of the box and bring it to the desired location due to size and weight concerns. Users
remove the packaging material and can then open the bags that contain the print car-
tridges, which have yields of 2,500 and 2,000 impressions for black and each colour,
respectively.
The CD auto-launches upon insertion in the drive, and the automated installation rou-
tine will have users up and running in a matter of minutes. It takes five clicks to install
the PCL and PostScript drivers, as well as the user’s guide; by extension, Smart
Panel is loaded with the drivers, which automatically detect configured accessories.
The port is automatically created.
Configuration of network settings can be easily performed from the control panel or
remotely via SyncThru Web Service.
BuyersLab.com
©2010 Buyers Laboratory Inc. Reproduced by permission of Buyers Laboratory Inc. Any duplication of this report without the written
permission of Buyers Laboratory, is unlawful and violators will be prosecuted. To purchase reprints, contact BLI at at info@buyerslab.com.