Roberts Radio 60-4357 Automobile User Manual


 
Dodge Raminator
Monster Truck
60-4357
Installing Batteries
You will need...
One 9V battery for the transmitter (not included)
One 7.2V battery pack for the Dodge Raminator (not included)
Put Battery in the Truck
Turn the truck off.
Lift the two latches on the back of the truck to
open the battery compartment cover.
Attach the battery pack’s connector to the
vehicle’s connector. Do not force them
together. They fit one way only. Place the
connectors in the space inside the compart-
ment and place the battery pack in the com-
partment. Be sure the wires do not touch any
moving parts.
Replace the cover and secure the tabs.
Put Battery in the Transmitter
Press OPEN on the battery compartment cover and slide
it off.
Insert one 9V battery in the battery compartment, match-
ing the polarity symbols (+ and -) as marked inside.
Replace the cover and snap it on.
Driving the Dodge
Raminator
Turn the Dodge
Raminator on. The
headlights illuminate
Use the transmitter’s
controls to drive and
steer the truck.
When you finish driving
the vehicle, turn the
transmitter and vehicle
off.
Step One
Step Three
Battery Pack Connector
Push to the left to turn left.
Push to the right to turn right.
Release to go straight.
Right Control Lever
Straight
Left
Righ
t
What’s Included
Dodge Raminator Plastic Antenna Tube
Transmitter
Box Wrench Owner’s Manual
Step Two
Installing the Antenna Tube
Route the antenna wire’s loose end through the supplied plastic tube and insert the tube
securely into the truck’s antenna tube holder.
Push forward to move forward. For turbo speed, push forward and to the right.
Pull backward to move backward.
Release to stop.
Left Control Lever
Stop
Reverse
Forward