Filter
Top Products
The alarm itself is not enabled for five minutes after selection. However, in five minutes, the
characters and backlighting on the LCD display window goes out and only the [FOG] key and
On/Off & Dimmer Control (to Off) are operable on the RAY430. The RAY430 will appear to be
OFE In this condition the burglar alarm will only sound if the ON signal from the external alarm
sensor connected to the ALARM is tripped.
Clearing the ALARM mode
To disable the Burglar alarm mode, press the [FOG] key or turn off the RAY430 by rotating the
On/Off & Dimmer control knob fully counterclockwise.
3.3.6 Aux Mode
If the audio output line from a radiotelephone equipment, cassette deck, or entertainment receiver is
connected to the AUX terminals 1 and 2, the output signals of such units can be amplified through
desired speaker stations by the RAY430.
1. Press the [AUX] mode key which will enable the auxiliary mode.
2. Press the desired speaker station key to select the specific station ([IC 1/2], [IC 3/4]).
3. Adjust the HAIL volume for the desired listening level.
3-13