Raymarine 530 GPS Receiver User Manual


 
Chapter 6: Installation 6-1
Introduction
Chapter 6: Installation
6.1 Introduction
This chapterprovides installation instructions for your SL520/530/631 PLUS
display. Details for mounting the SL520/530/631 PLUS display and
connecting the equipment are included.
To install display unit follow the instructions in Section 6.2 to Section 6.6.
ou should then test the display as described in Section 6.7.
To connect your display to other equipment, follow the guidelines in
Section 6.8 and Section 6.9, taking particular care to ensure the correct
polarity of the SeaTalk supply.
Figure 6-1: Typical Chartplotter System
Note: If you wish to practice using the display before installation, connect a
12V or 24V DC power supply (connecting the red wire via a 6.3A quick blow
fuse to positive and the black wire to negative) and using the simulator mode,
as described in Chapter 2.
NMEA
SeaTalk
Display Unit
Distribution Panel
D4288-1
12/24V Supply
12V Supply
12V Supply
Junction
Box
GPS
Compass