Filter
Top Products
Pairing procedure
NOTE:
The pairing procedure must be performed
when the vehicle is stationary. If the vehicle
starts moving during the procedure, the
procedure will be cancelled.
Main Menu
“Setup”
᭺
A
“Pair Phone”
᭺
B
“New Phone”
᭺
C
Initiate from handset
᭺
D
Name phone
᭺
E
Assign priority
᭺
F
Choose ringtone
᭺
G
1. Press the button on the steering
wheel. The system announces the available
commands.
2. Say: “Setup”
᭺
A
. The system acknowledges
the command and announces the next set of
available commands.
3. Say: “Pair phone”
᭺
B
. The system acknowl-
edges the command and announces the
next set of available commands.
4. Say: “New phone”
᭺
C
. The system acknowl-
edges the command and asks you to initiate
pairing from the phone handset
᭺
D
.
The pairing procedure of the cellular phone
varies according to each cellular phone
manufacturer. See the cellular phone Own-
er’s Manual for details. You can also visit
www.nissan-usa.com/bluetooth for instruc-
tions on pairing NISSAN recommended cel-
lular phones.
When prompted for a PIN code, enter
“1234” from the handset. The PIN code
“1234” has been assigned by NISSAN and
cannot be changed.
5. The system asks you to say a name for the
phone
᭺
E
.
If the name is too long or too short, the
system tells you, then prompts you for a
name again.
Also, if more than one phone is paired and
the name sounds too much like a name
already used, the system tells you, then
prompts you for a name again.
6. The system asks you to assign a priority level
᭺
F
. The priority level determines which
phone is active when more than one paired
Bluetoothா phone is in the vehicle. Follow
the instructions provided by the system or
refer to “Setup” later in this section for more
information on changing priorities.
7. The system will ask if you would like to select
a custom ring tone
᭺
G
. Follow the instruc-
tions provided by the system or refer to
“Setup” later in this section for more infor-
mation on selecting ringtones.
Making a call by entering a phone
number
Main Menu
“Call”
᭺
A
Number (speak digits)
᭺
B
“Dial”
᭺
C
1. Press the button on steering wheel. A
tone will sound.
2. Say: “Call”
᭺
A
. The system acknowledges
the command and announces the next set of
available commands.
Display screen, heater, air conditioner, audio and phone systems 4-77
੬ REVIEW COPY—
2007 Quest (van)
Owners Manual—USA_English (nna)
02/27/06—debbie
੭