Metra Electronics 95-9012 Automobile Accessories User Manual


  Open as PDF
of 4
 
95-9012 KIT ASSEMBLY/ FINAL ASSEMBLY
A
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2
Slide the DDIN radio unit into the
DDIN bracket/radio housing assembly
and secure the unit to the kit using
the (8) Phillips screws supplied with
the kit.
(Figure A)
1
DOUBLE DIN HEAD UNIT PROVISION/
ISO STACKED HEAD UNIT PROVISION
1-800-221-0932
REV. 09-02-09 © COPYRIGHT 2009 METRA ELECTRONICS CORPORATION INST95-9012
www.metraonline.com
Note: This installation kit is an extremely tight fit and requires force to be
“snapped” into the dash opening. Removal of aftermarket radio is even
more difficult than installation, so please be sure to fully test the after-
market radio prior to completing the kit’s installation.
Snap kit/ radio assembly into the
dash opening.
3
2
 previous