Filter
Top Products
Crisp, tapered lines accentuate the
bold stance of this sleek and
modern sedan. Inside, available
leather seating, MP3 sound system
and mahogany colored accents
create a comfortable yet stylish
interior. The available Duratec V6
engine
provides a head-turning
combination
of power and
efficiency that will take you
anywhere you want to go in style.
Mercury Milan is the perfect
combination of sophistication
and practicality. We invite you to
explore this easy-to-use Quick
Reference Guide to acquaint you
with some of the features of your
Mercury Milan.
7 Anti-lock Brake System
(ABS) Warning Light
(if equipped) The ABS light
illuminates briefly when the
ignition is turned on. If the
ABS light remains on or flashes
after the engine is started,
have the system serviced immediately by your
authorized dealer. Normal braking (less ABS)
will still be functional unless the brake warning
light is also illuminated. Note: It is normal to
feel a pedal pulsation or hear a slight noise
when the ABS system is activated.
8 Tilt / Telescopic Steering
Wheel Lever
Push the lever down to unlock
the steering column. Move
the steering wheel up or
down and in or out to find
the
desired position. While
holding
the steering wheel in place, pull the
lever up to lock the steering column.
9 Check Fuel Cap Light
This icon illuminates when the
fuel cap may not be properly
installed. If you continue to
drive with this light illuminated,
the Check Engine Indicator
light may come on.
10 Brake System
Warning Light
The brake system warning
light illuminates briefly when
the ignition is turned on. This
light will remain on when the
parking brake is applied and the ignition is on.
If this light remains on after releasing the park-
ing brake, this indicates
a low brake fluid level or a brake system
malfunction. Have the brake system inspected
immediately by an authorized dealer.
11 In-Dash Clock
Press + to advance the time.
Press – to reverse the time.
Auxiliary Power Point
The auxiliary power point
is located inside the
center console utility
compartment. Note: Do not
use the
power point over the
capacity of 12VDC / 180W.
Power Outside Mirrors
Rotate the control clockwise
to adjust the right mirror.
Rotate the control counter-
clockwise to adjust the left
mirror. Move the control in
the direction you wish to tilt
the mirror. Return the control to the center
position to lock the mirrors in place.
1 Headlamps, Foglamps
(if equipped), and Panel
Dimmer Control
Turn the control one position
to the right to turn on the
parking lamps , instrument
panel lamps, license plate
lamps and tail lamps. Turn the control to the
second position on the right to turn on the
headlamps . Turn the control one position
to the left to activate the
autolamp feature (if equipped), which
automatically turns the exterior lamps on and
off, based on available daylight. The system
also keeps the lights on for a short time after
the ignition is turned off. Pull the control out
to activate the fog lamps. The fog lamp
indicator light will illuminate. The fog lamps
will not operate when the control is turned off
or when the high beams are on. Use the
panel dimmer control to adjust the level of
brightness on the instrument panel during
parking lamp and headlamp operation. Move
the control to the full upright position, past the
detent, to turn on the interior lamps.
2 Traction Assist Light
(if equipped) This icon
illuminates when the Traction
Assist is active. If the light
remains on, have the system
serviced immediately by an
authorized dealer.
3 Throttle Control /
Transmission Light
This icon illuminates when
a powertrain fault has been
detected. Contact an
authorized dealer as soon
as possible.
4 Steering Wheel Controls
(if equipped) Your steering
wheel controls allow you to
set and adjust vehicle speed,
as well as make adjustments
in your audio and climate
control systems.
The appearance of your
vehicle’s speed control
switches may vary according
to your option package.
To set the speed control,
ensure that the vehicle
speed
is at least 30 mph. Press and release ON.
Accelerate to the desired speed. Press and
release SET (+). The speed control indicator
light will illuminate in the cluster. Remove
your foot from the accelerator. Once set, press
and release SET (-) or (+) to decrease or
increase the speed in small increments. Or,
press and hold until you reach the desired
speed. To disengage speed control but not
erase the previous set speed, press the brake
pedal or clutch pedal (if equipped). To disen-
gage and erase the speed, press OFF.
Press – TEMP + to decrease /
increase the cabin
temperature.
Press – FAN + to decrease/increase fan speed.
Press – VOL + to decrease/increase audio volume.
Press MEDIA to select AM, FM1, FM2 or CD.
Press to access the previous / next
preset radio station or CD track.
5 Check Engine Light
The Check Engine light
illuminates briefly when the
ignition is turned on. If the
light remains on or flashes
after the engine is started, the
On Board Diagnostics System
(OBD-II) has detected a malfunction. Drive in
a moderate fashion and have your vehicle
serviced immediately by an authorized dealer.
6 Airbag Readiness Light
The airbag readiness light
illuminates briefly when the
ignition is turned on. If this
light remains on or continues
to flash after the engine is
started, have the system
serviced immediately by your authorized dealer.
A chime will also sound if a malfunction in the
supplemental restraint system is detected.
INSTRUMENT PANEL
1432 4567 111098
Power Windows
Push down (to the first detent) and hold the
switch to open. Pull up (to the first detent) and
hold the switch to close. One touch down: This
function allows the
driver’s window to open fully without holding
the control down. Push the switch completely
down to the second detent and release quickly.
The window will then fully open. Momentarily
press the switch to any position to stop the
window operation.
Accessory Delay: With accessory delay, the
window switches, audio system, and moonroof
(if equipped) may be used for up to 10 minutes
after the ignition switch is turned to the
1 (LOCK) (OFF) position or until any door is opened.
Moon Roof
(if equipped) The moon roof is equipped with a
one-touch, express opening, closing, and venting
feature. To open the moon roof, press and
release the rear portion of the control. To close
the moon roof, press and release the front por-
tion of the control. To stop motion at any time
during the one-touch operation, press the con-
trol a second time.
Integrated Keyhead / Keyfob Transmitter (IKT)
and Remote Entry System Features
Your vehicle comes equipped with two specially
programmed Integrated Keyhead Transmitters
(IKTs). IKTs are both a programmed ignition key
and a remote keyless entry transmitter. Handle
the IKT carefully when starting the car to avoid
accidentally pressing any of the remote entry
buttons. Press once to unlock the driver’s
door. The interior lamps will illuminate. Press
twice to unlock all the doors. Press once to
lock all the doors and activate the perimeter
alarm system (if equipped). Press twice to
confirm all the doors and trunk are closed.
The horn will chirp and the turn signal lamps
will flash once if all the doors and the trunk are
closed. Press to activate the panic alarm.
The horn will sound and the turn lamps will
flash. Press again or turn the ignition on
to deactivate the panic alarm. Press to
unlock the trunk.
Auto Dimming Rear View Mirror
(if equipped)
The rear view mirror will automatically
darken when the mirror detects bright lights
behind the vehicle to help minimize glare.
Rear Seat Release
Both rear seats can be folded down for
additional cargo space. Pull the release
handle located inside the trunk to fold
down the seat.
Securilock™
The Securilock™ passive anti-theft system is
an engine immobilization system. This
system is designed to help prevent the
engine from being started unless a coded
Integrated Keyhead Transmitter (IKT)
programmed to your vehicle is used. Using
the wrong type of coded key may lead to a
“no start” condition. The anti-theft
indicator in the instrument
cluster will flash to indicate the Securilock
system is functioning as a theft deterrent
when the ignition is turned off.
Autolock/Auto-unlock (if equipped)
Autolock automatically locks all vehicle doors
when all the doors are closed, the ignition is
in the RUN position, you shift into any gear
that puts the vehicle into motion, and the
vehicle is moving above 12 mph (20 km/h).
Auto-unlock automatically unlocks all the
doors when the vehicle has been traveling
above 12 mph (20 km/h), comes to a
complete stop, and the driver door is opened
within 10 minutes of the ignition being
turned off. Note: For instructions on
disabling autolock, please refer to your
Owner’s Guide or see your authorized dealer.
BeltMinder
®
The BeltMinder
®
is a supplemental warning
system which intermittently chimes to alert
the driver and passenger if their safety belts
are not fastened. For further information,
please refer to your Owner’s Guide.
Message Center
The message center
displays important vehicle
information through a
constant monitoring of
vehicle systems. The
message center displays
features such as trip odometer, compass
(if equipped), distance to empty, average
fuel economy, and a language selector.
The message center also provides vehicle
system checks and will notify you of
potential vehicle problems with a display of
system warnings.
INFO: Press to scroll through the following
displays: Odometer, Trip Odometer A or B,
Distance to Empty, Average Fuel Economy,
Average Speed, Compass (if equipped), and
Trip Elapsed Time 1 or 2.
RESET: Press to select and reset functions
shown in the Info (Information) and Setup
Menu.
SETUP: Press to scroll through: System
Check, Units (English/Metric), and Language
(English, Spanish, or French).
For further information, please refer to your
Owner’s Guide.
Additional Features