Filter
Top Products
Black plate (19,1)
2. Press the set switch followed by one of
the programming buttons (1―3) within
about 5 seconds. A beep sound is heard
after the programming is completed.
NOTE
If the programming button you have selected is
already programmed, it will be overwritten
with the new setting.
Activating the seat to a pre-
programmed position
1. Shift the selector lever to the P
position.
2. Press the programming button (1―3)
that you selected when programming
your seat position. A beep sound is
heard after the adjustment to the
programmed position is completed.
NOTE
l
When the ignition switch is in the ACC or
OFF position, a pre-programmed seat
position can be activated regardless of the
selector lever position.
l
If the seat is already adjusted to the
position you are activating, the seat does
not move, however, a beep sound is heard
to confirm that the adjustment operation is
completed.
Activating the seat position when
unlocking with an advanced key/
retractable type key
Your desired seat position can be
activated when unlocking the doors.
Perform the following procedure using the
advanced key/retractable type key.
1. Turn the ignition switch to the LOCK
position.
2. Adjust the seat to the desired position.
3. Press the set button next to the
programming buttons and then the
unlock button on the advanced key/
retractable type key you want to
program within about 5 seconds. A
beep sound is heard when the operation
is completed.
When the driver's door is unlocked using
a programmed advanced key/retractable
type key, the seat is activated to a
programmed position if the driver's door
is opened within about 40 seconds. A
beep sound is heard after the adjustment
to the programmed position is completed.
Essential SafetyEquipment
Seats
2-7
CX-9_8AU2-EA-09G_Edition1 Page19
Wednesday, July 8 2009 12:3 AM
Form No.8AU2-EA-09G