Magellan 3150, 3100, 3140 GPS Receiver User Manual


 
Map Screen 13
Accessing the Map Screen
1. On the Main Menu, tap Show Map.
2D Mode
The map is normally displayed in 3D mode but you can
set the map to 2D mode if so desired. Choose the
mode that is most suitable for you.
In 2D mode, you can pan across the map looking for a
location to route to or save in your address book.
Setting the Map Modes (2D or 3D)
1. From the Map screen, tap MENU.
2. Tap the Next arrow to access page 2 of the
Main Menu.
3. Tap User Options.
4. Tap Map Options.
5. Tap 3D Map or 2D Map.
6. Tap Save.
Panning on the Map
1. While viewing the Map screen in 2D mode, slide your finger or stylus across the map.
2. The location icon changes to . (The circle is the crosshairs for a position and the red
arrow points to your current location.
3. To exit panning, tap ESC and the map is returned to your current position.
Saving a Position While Panning
1. Pan the map until the icon crosshairs are over the location you want to save to your address
book. (Must be a position that does not have a POI icon displayed.)
2. Tap in the centre of the circle icon. (If nothing happens then you have not zoomed in
enough. Tap the zoom in icon and try again.)
3. On the Route To This Address? screen, tap Save.
4. Edit Information:
Tap Edit on the Edit Name line to create a name for this location.
Tap on any of the three (work, home, mobile) phone buttons to enter a phone number.
Tap Edit on the Edit Information line to add additional information. (Up to 35 characters
can be entered.)
5. If you want to tag this location as one of your favourites, tap on the “Favourite” check box.
6. When the details for this address are acceptable, tap Save.
Map Screen in 2D Mode