Magellan 3150, 3100, 3140 GPS Receiver User Manual


 
Fundamentals 5
Fundamentals
Powering on the Magellan Maestro
The On/Off button is located on the right-hand side of the Magellan Maestro as shown in the Overview
chapter.
Turning the Magellan Maestro On
1. Press and hold the On/Off button for 1-2 seconds.
2. Read the Warnings and tap OK.
Turning the Magellan Maestro Off
1. Press and hold the On/Off button for 1-2 seconds.
Selecting Auto Power Off Time
The Magellan Maestro can be set to shut down automatically after a time selected by you.
The receiver will turn off after the selected time if; A) the position hasn’t changed and B) the
touchscreen hasn’t been pressed.
1. Access the Main Menu.
2. Tap the Next arrow to access the Main Menu Page 2.
3. Tap User Options.
4. Tap System Settings.
5. Tap Power.
6. Select Auto Power Off time; Never, 10 Minutes, 20 Minutes or 30 Minutes.
7. Tap Save.
8. Tap the Back arrow to return to the Main Menu.
Volume
There are two ways to access the volume controls; the first is by tapping the speaker icon on the Map
screen and the second is through User Options.
Changing the Volume from the Map Screen.
1. Tap the speaker icon .
2. Tap on the Mute button to mute the volume, or tap inside the volume adjust bar below the
Mute button to change the volume levels.
3. Tap Save.
If you have muted the volume, the speaker icon will be displayed with a line through it, indicating it is
muted. To unmute the volume, tap the speaker icon again.