Magellan 3100 GPS Receiver User Manual


 
Bluetooth 43
5. A passkey input window will pop up on your
Magellan Maestro. In this popup window, you
will need to input the same numbers as you
entered into your mobile phone..
Establish Connection
Once paired, you will still need to establish a connection with the mobile phone if the message “No
paired phone connected” appears at the bottom of the Bluetooth Main Menu screen.
If your mobile phone doesn’t support “Hands-free” services and just supports the “Headset” service,
you needn’t connect. If you dial a number from your mobile phone or receive an incoming call the
“Headset” service will connect automatically. The main interface will display a status message "xx
connected, partial function supported only",
Establishing a Bluetooth Connection
1. Access the Bluetooth Main Menu.
2. Tap the Search for Devices icon.
3. The Searching for devices screen will appear. Once a device has been found, it will return to
the Bluetooth Main Menu with a message at the bottom of the screen indicating that a
device is connected.
Place a call
Placing a Call
1. Access the Bluetooth Main Menu.
2. Tap the Call icon.
You can enter 13 characters: “0~9”, * and
# with the buttons on the keypads. Input
“+” by pressing * for about 1 second.
You can tap to delete the phone
number you have entered. Press the button
for about half a second and the entire row
will be deleted.
Once you have entered the phone number you want to dial, tap to place the call.
Passkey Request screen
Call screen