Filter
Top Products
Starting Up
14
The display backlight has three levels of intensity: off, low and high. When the eXplorist is first turned on, the
display backlight is off. Press the LIGHT button on the top left side of the eXplorist to turn the backlight on
low. Pressing the LIGHT button a second time sets the backlight to high. To turn off the backlight, press the
LIGHT button again.
Backlight intensity changes each time you press
the LIGHT button.
Remember: Using the display
backlight causes severe drain on the batteries.
Turn the eXplorist on. Press the Power button. When the Startup screen is
displayed, press ENTER.
Select Language. When you turn on the eXplorist for the first time you are
given the option of selecting one of the ten languages that will be used.
You can change the language selection at any time by accessing Menu >
Preferences > Languages.
Tip: If you accidentally change the language and you can’t read the text
and need to change it back, press the NAV button until the Satellite Status
screen is displayed. Press MENU. Use the Arrow joystick to highlight the
fourth line and press ENTER. Use the Arrow joystick to highlight the fifth
line and press ENTER. The Language Select screen will be displayed.
Read Warning. When you agree to the warning statement, press ENTER to
continue.
Turning the Display Backlight On/Off
Using the eXplorist for the First Time
Use arrow joystick to move the
highlight up and down. Press
ENTER to accept.
Press ENTER to continue.