Filter
Top Products
29
Bluetooth
Please note that not all of the features of the Magellan RoadMate Bluetooth will work with all phones as features
of cellular phones vary from manufacturer to manufacturer.
Pairing your Bluetooth-ready Phone for the First Time
Before you use the Bluetooth function of the Magellan RoadMate receiver you must pair your Bluetooth-
ready phone to the RoadMate. A list of compatible phones can be found on the Magellan web site at
www.magellangps.com/support. Before beginning you should have the instructions supplied with your phone
for questions about accessing the Bluetooth pairing mode for your phone.
1. From the Map screen, tap the Bluetooth icon .
2. Tap the Settings icon.
3. Tap Pair Phone Now.
4. Enable Bluetooth on your phone. (See instructions supplied with your phone for any questions.)
5. On your phone, begin the searching for Bluetooth device function.
6. Select Magellan RoadMate from the list of devices found.
7. The Bluetooth phone will begin communicating with the Magellan RoadMate. When prompted, enter
‘1234’ as the passcode on your phone.
8. Your phone may ask to connect to the Magellan RoadMate. (If not, refer to your phone manual for
connecting to a Bluetooth device.)
9. When connected, the Magellan RoadMate will ask if you want to accept the connection. Tap Yes.
10. Wait while the communication is established.
11. You may now import contacts from your phone. Tap Yes to begin importing. (If you choose not to import
your contacts now you can do so later from the Bluetooth Settings menu.)
12. You may need to confirm on your phone to accept connection from the Magellan RoadMate.
13. When the contacts have been successfully imported a confirmation screen is displayed.
14. The Bluetooth Settings screen is displayed.
Bluetooth Settings
Accessing the Bluetooth Settings
1. From the Map screen, tap the Bluetooth icon .
2. Tap the Settings icon.
Enabling/Disabling Bluetooth
1. Access the Bluetooth Settings screen.
1. Check Enable Bluetooth to turn Bluetooth on; uncheck to turn Bluetooth off.
Enabling/Disabling Auto Connect
1. Access the Bluetooth Settings screen.
2. Check Auto Connect to set the Magellan RoadMate receiver to auto connect to your paired Bluetooth
phone when it is in range; unchecked turns off auto connect.