Filter
Top Products
85
should stop searching for satellites or continue searching. When this
message appears, the
STOP SEARCHING command is highlighted. To turn
off the GPS engine and save power, press
ENT.
Use Indoors
If you don't want to wait for AirMap to prompt you to switch to the in-
side setting, you can manually switch to indoor operation:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT|↓ to USE INDOORS|ENT.
2. To return to the last page displayed, press
EXIT|EXIT.
3. You can return to this command and press
ENT again to turn the fea-
ture off, or just turn the unit off and back on again. AirMap will auto-
matically resume searching for satellites.
Use Indoors selection box on GPS Setup Menu. With the box selected as in this
figure, the GPS engine is turned off to save power.
Reset Options
To reset all features to their factory defaults:
1. Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to RESET OPTIONS|ENT|←
to
YES|ENT.
NOTE:
Reset Options does not erase any waypoints, routes, icons or plot trails.
Reset Options command, left, and the Reset Options Menu, right.