Lowrance electronic 500 GPS Receiver User Manual


 
65
Selecting a Waypoint
To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.
Delete a Waypoint
To delete a waypoint: press
FIND|ENT| to NAME|ENT|ENT| to way-
point name|
ENT| to DELETE|ENT| to YES|ENT. To return to the pre-
vious page, press
EXIT|EXIT.
Edit a Waypoint
Waypoint Name
To edit waypoint name: press FIND|ENT| to NAME|ENT|ENT| to way-
point name|
ENT| to EDIT NAME|ENT| to YES|ENT. To return to the
previous page, press
EXIT|EXIT.
Waypoint Symbol
To edit waypoint symbol: 1. press FIND|ENT| to NAME|ENT|ENT| to
waypoint name|
ENT| to EDIT SYMBOL|ENT. 2. Use arrow keys to select
desired symbol and press
ENT. To return to the previous page, press
EXIT|EXIT|EXIT.
Waypoint Position
To edit waypoint position: 1. press FIND|ENT| to NAME|ENT|ENT| to
waypoint name|
ENT| to EDIT POSITION|ENT.
2. Latitude: press
ENT, then press or to change the first character,
then press to the next character and repeat until the latitude is cor-
rect. Press
EXIT.
3. Longitude: press |
ENT, then press or to change the first charac-
ter, then press to the next character and repeat until the latitude is
correct. Press
EXIT.
4. When latitude and longitude are correct, return to the previous page:
press
EXIT|EXIT|EXIT|EXIT.
Waypoint Altitude
To edit waypoint altitude: 1. press FIND|ENT| to NAME|ENT|ENT| to
waypoint name|
ENT| to EDIT ALTITUDE|ENT.
2. Press
ENT, then press or to change the first character, then press
to the next character and repeat until the altitude is correct. Press
EXIT.
3. To return to the previous page: press
EXIT|EXIT|EXIT.