Lowrance electronic 500 GPS Receiver User Manual


 
53
1. Press
MENU|MENU| to SYSTEM SETUP|ENT| to TRANSFER MY DATA|ENT
and the screen below appears.
The Transfer My Data submenu asks if you want to save data to the MMC or
load data from the MMC into AirMap's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into AirMap in order to activate the Load or Save commands.
To load data from the MMC to AirMap: press to
LOAD|ENT.
3. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT to activate the selection box, use or
to highlight the file, then press
ENT to accept the selection. Next, press
to
LOAD|ENT. The unit will display a completion message when the
data transfer is finished. To return to the Page view, press
EXIT|EXIT|EXIT.
Navigate
Navigation is one of the most powerful reasons for owning an AirMap,
and has already been addressed in Sec. 3. Land navigation is just as
useful, though. Just like the air navigation options, you can get accu-
rate information about where you want to go, how to get there, how
long it will take, and other useful trip information.
Navigate Back to Man Overboard Waypoint
In Land Mode, this unit has a man overboard feature that shows navi-
gation data to the location where the feature was activated. (This fea-
ture replaces Aviation Mode's "Find Nearest Airport" shortcut.) To acti-
vate it, press the
ZOUT and ZIN keys at the same time. Your position at
the time these keys are pressed is used as the man overboard position.
The unit automatically begins navigating to the MOB waypoint.
Cancel Navigation
Press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.