Filter
Top Products
83
To change map orientation: from the Map Page, press
MENU|↓ to MAP
ORIENTATION|ENT. Use ↑ or ↓ to select the desired mode, then press ENT.
Press
EXIT|EXIT to return to the page display.
Map Menu (left) and Map Orientation menu with
the North Up map orientation option selected (right).
Navionics
Charts
Your GlobalMap can display Navionics
electronic charts on MMCs.
They work just like a MapCreate custom map on an MMC.
Entrance to Chesapeake Bay in a MapCreate 6 custom map,
15-mile zoom (left). Same position on Navionics chart at
10-mile zoom (center) and at a 5-mile zoom (right).
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
2. From the Map Page, press
MENU|↓ to MAP DATA|ENT|→ to NAVIONICS
MAP CHOICE|ENT. Use ↑ or ↓ to select the Map Name, then press
ENT|EXIT|EXIT.