Lowrance electronic 4900M GPS Receiver User Manual


 
64
Navigate a Route in Reverse
Here's how you run a route backwards, from the end waypoint to the
beginning waypoint.
1. From the
NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE,
press
MENU|MENU| to ROUTE PLANNING|ENT.
2. Press
to select route name|ENT| to NAVIGATE| to REVERSE|ENT|
to NAVIGATE|ENT.
3. Upon arrival at your destination, cancel navigation:
press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
Navigating along a route: Fig. 1 shows the GlobalMap 4900M Naviga-
tion Page at the start of a route, heading straight for the first waypoint
(Wpt 1). In Fig. 2, the traveler has arrived at Wpt 1; the arrival alarm
has been triggered and the bearing arrow on the compass rose has
turned to point east, toward Wpt 2. In Fig. 3 the traveler has turned
east on his new course and is heading straight for Wpt 2, which is 2.15
miles away. Fig. 4 shows route navigation on the Map Page. In this fig-
ure, the traveler has reached Wpt 2 and is half-way along the leg be-
tween Wpts 2 and 3.
Figure 4.
Figure 3.
Figure 2.
Figure 1.