Lowrance electronic 3500C GPS Receiver User Manual


 
54
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
ENT to activate the selec-
tion box, use or to highlight the file, then press
ENT to accept the
selection. Next, press to
LOAD DATA|ENT. The unit will display a com-
pletion message when the data transfer is finished. To return to the
Page view, press
EXIT|EXIT|EXIT|EXIT.
These figures show the menu sequence for loading a GPS Data File
from an MMC into the unit's memory.
Cancel Navigation
You can turn off any of the navigation commands after you reach your
destination or at any other time by using the Cancel Navigation com-
mand. Press
MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT.
Figure 3.
Figure 2.
Figure 1.
Figure 4.