Lowrance electronic 10772001 GPS Receiver User Manual


 
102 | | 103
Networking | Lowrance HDS Gen2 Touch Networking | Lowrance HDS Gen2 Touch
Damping accomplishes this by averaging the data. The higher the
damping level, the more data history will be averaged. As a result,
higher damping levels cause a delayed response to changes in the
data.
Device list
Tap device list to view all devices connected to a NMEA 2000
network. You can configure and calibrate (where applicable) devices
shown on the device list.
Calibrating devices
Devices that can be calibrated from the device list will have a
Calibrate button on the Device information dialog.
Tap Calibrate and follow the onscreen instructions to calibrate the
device.
¼ Note: for more information on device calibration, refer to the
documentation that came with your device.
Diagnostics
Used to view NMEA 2000 network information and the status of
information shared between units. From the UDB tab, you can see
IP addresses of attached Ethernet devices and if an Ethernet cable is
connected or unplugged.