Filter
Top Products
FIGURE B
L I N C O L N
L I N C O L N
NAVIGATOR
NAVIGATOR
QUICK REFERENCE GUIDE
2008
8L7J 19G217 AB
This Quick Reference Guide isnot intended toreplace your
vehicle Owner’s Guide which containsmore detailed
information concerningthe features ofyour vehicle, aswell
as important safetywarnings designed tohelp reduce the
risk ofinjury to youand your occupants.Please read your
entire Owner’s Guide carefully as you begin learning about
your new vehicle and refer to the appropriate
c
hapters when questions arise.
All information contained in this Lincoln Quick Reference
Guide was accurate at the time of duplication. We reserve
the right to change features, operation
and/or functionality
of
any vehicle specification at any time. Your Lincoln dealer is
the best source for the most
current information.
For detailed operating and safety information,
please refer to your Owner’s Guide.
October 2007
Second Printing
Quick Reference Guide
Lincoln Navigator
Litho in U.S.A.
This vehicle handles differently from an
ordinary passenger car in driving conditions
which may occur on streets and highways and
off-road. DRIVE WITHCARE ANDWEAR A
SAFETY BELT ATALL TIMES. Lincoln urges you
to read the Owners’ Guide and Driving Your
SUV
or Truck Supplement for further informa
tion
on
safe driving precautions and instructions.
Ford Motor Company Customer Relationship Center
P.O. Box 6248
Dearborn, MI 48121
1-800-392-3673 (FORD)
(TDD for the hearing impaired: 1-800-232-5952)
ESSENTIAL INFORMATION
FUEL TANK CAPACITY – Your vehicle’s fuel tank can accommodate 28 gallons (106L) of
gasoline. (Navigator L accommodates 33.5 gallons (126.8 L) of gasoline.) Your vehicle is
designed to use "Regular" unleaded gasoline with pump (R+M)/2 octane rating of 87. The use
of gasoline with lower octane ratings may degrade performance.
TIRE PRESSURE – Your tire pressure is properly set at the dealership according to the
recommended specifications found on the Safety Compliance Certification Label or Tire Label
located on the driver’s door latch pillar or the edge of the driver’s door. The tire pressure should
be checked at least once a month or before long trips using an accurate tire gauge. Please see
“Additional Features” on reverse side for
information on the TPMS. Warning: Improperly inflated
tires can affect vehicle handling and tire performance.
FUSES –
If electrical components in the vehicle are not working, a fuse may have blown.
For more information about changing a fuse, please consult your Owner’s Guide.
FUEL PUMP SHUT-OFF SWITCH – After a collision, if the engine cranks but does not start,
the fuel pump shut-off switch may have to be reset. The switch is located in the left rear quarter
trim panel, near the liftgate, behind an access panel. For complete details on resetting the
switch, please consult your Owner’s Guide.
CHANGING THE TIRES –
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move to a safe
place on the side of the road. Prior to jacking, hoisting or towing your vehicle, be sure to turn
OFF the running boards (if equipped), and the optional rear load leveling suspension. Your vehicle
may be equipped with a conventional spare tire that is different in one or more of the following:
type, brand, size, speed rating and tread design. Your vehicle may be equipped with a spare wheel
that may not match the road wheels and is not equipped with a Tire Pressure Monitor System
(TPMS) sensor.
LOCATION OF THE SPARE TIRE AND TOOLS – The spare tire is located under the vehicle,
just forward of the rear bumper. The Jack Tools and Jacking Instructions reside under the access
panel, located in the floor compartment behind the rear seat.
ROADSIDE EMERGENCIES – To fully assist if you should have a vehicle concern, Lincoln
offers a complimentary roadside assistance program. This program is separate from the New
Vehicle Limited Warranty. The service is available 24 hours a day, seven days a week for the New
Vehicle Limited Warranty period (U.S.) or Basic Warranty period (Canada). Roadside assistance
will cover changing a flat tire, jump-starts, limited fuel delivery, lockout assistance, winch out
and towing of your vehicle.
ROADSIDE ASSISTANCE CENTERS
United States: (800) 521-4140 | Canada: (800) 665-2006
For complete details on any roadside assistance concern, consult the Roadside Emergencies
chapter or the Customer Assistance chapter in your Owner’s Guide.
ADDITIONAL INFORMATION
REMOTE ENTRY SYSTEM – Press control B once to unlock the driver’s door
and twice to unlock all doors and liftgate. Press control A once to lock all doors
and liftgate. Pressing the control a second time within three seconds will flash
the park/turn signal lamps and will cause the horn to chirp to confirm that all
the doors and liftgate are closed and locked. If a door is still ajar, your vehicle
will chirp twice. Press control C to unlatch the liftgate window. Press control D
(if equipped) twice to automatically fully unlatch and open the liftgate, or
automatically close the liftgate. Press control E to sound the panic alarm. To
silence, press the control again, or turn the ignition ON.
CAR FINDER – Press control A twice within 3 seconds. The horn will chirp and the turn lamps will flash.
It is recommended that this method be used to locate your vehicle, rather than using the panic alarm.
KEYLESS ENTRY SYSTEM – With this control you can lock or unlock all doors
and the liftgate without using a key. First, enter your five-digit program code
and then press the corresponding quick key: Unlock All Doors and Liftgate:
Press 3-4 within 5 seconds. Lock All Doors and Liftgate: Press buttons 7-8
and 9-0 simultaneously.
ADVANCETRAC
®
WITH RSC STABILITY ENHANCEMENT SYSTEM – The AdvanceTrac
®
with Roll
Stability Control™ (RSC) system provides stability enhancement features for certain driving situations
when driver assistance is needed. It helps your vehicle maintain traction when driving on slippery
and/or hilly road surfaces. If your vehicle should become stuck, try switching the system off by
momentarily pressing and holding the AdvanceTrac
®
with RSC button on the instrument panel.
Remember to switch the AdvanceTrac
®
with RSC system back on once the vehicle is no longer stuck.
MESSAGE CENTER – With the ignition in the ON position, the message center
displays important vehicle information through a constant monitor of vehicle
systems. The system will notify you of potential vehicle problems by displaying
system warnings followed by a long indicator chime. You may select the INFO
button on the message center to display trip odometer, odometer, compass,
distance to empty, average fuel economy and trip elapsed drive time. The
RESET button may be used to reset selected functions in the INFO and SETUP
menus. For more information about your message center functions, please
consult your Owner’s Guide.
REVERSE CAMERA SYSTEM – The reverse camera system (Figure A) provides
a video image of the area behind the vehicle. The reverse camera system will
automatically provide an image in the rear view mirror (Figure B), when the
vehicle is placed in R (Reverse) gear. This image will continue to be displayed
on the mirror for a few seconds, once the vehicle has been shifted out of R
(Reverse) gear.
Note: The reverse camera system is a reverse aid supplement device that still
requires the driver to use it in conjunction with the rear view and side view
mirrors for maximum coverage. For complete details on the reverse camera
system, please consult your Owner’s Guide.
TIRE PRESSURE MONITORING SYSTEM – This system monitors tire pressure on all road tires and
provides the driver with a yellow warning light when one or more of your tires is significantly under-
inflated. Message center equipped vehicles provide additional warning messages. The TPMS warning
light will reset itself (turn off) after the tires are inflated to the proper pressure and the vehicle is
driven above 20 mph (32 km / h) for at least 2 minutes.
SEATING
SECOND ROW SEATS
IMPORTANT: Before folding the second row seats, ensure that the head restraints are fully flipped
down by pulling on the strap and that all items have been removed from the floor and off the seats.
ENTERING THE THIRD ROW SEAT – Fold head restraint forward (Pos. 1). Pull up on the lever
(Lever 1) located on the side of either outboard second row seat until the seatback folds forward
to the cushion (Pos. 2). Pull lever fully upward (Lever 1). The seat will then flip forward (Pos. 3).
EXITING THE THIRD ROW SEAT – Fold head restraint forward (Pos. 4). Pull up on the strap
located at the back of the second row seat by the outboard side shield (Pull Strap). The seatback
will fold forward to the cushion (Pos. 5). Continue pulling up on the pull strap and the seat will
flip forward (Pos. 6). To return the seat to the upright position, push the seat down until it is
latched to the floor strikers. Then, lift the seatback to the upright position and flip the head
restraint to the upright position.
FOLDING THE OUTBOARD SEATBACKS TO A LOAD FLOOR POSITION – (REFER TO
IMPORTANT NOTE ABOVE)
To
fold the seats to a load floor
position, lift the lever (Lever 1)
located on the outboard side of
the seat to release the seatback.
To lower the seat further to the
fully-lowered position for
maximum cargo capacity, locate
(Lever 2) on the seatback.
Pulling the lever releases the
seat into the kneel-down floor position. A moderate force may be required to move the seat forward
and down.
R
ETURNING THE SEATS TO THE UPRIGHT POSITION FROM
THE FULLY-LOWERED FLOOR POSITION –
The seatback cannot
be returned to the upright position until the seat is returned from
the kneel-down position. To return the seat from the kneel-down
position, lift and pull the seat rearward until the latch is fully-
engaged. Do not attempt to unlatch the rear floor hooks while the
seat is in the kneel-down position. With the seatback in the folded
down posi
tion, lift up on the seatback until a click is heard, locking
it into the upright position.
FOLDING THE 20% MIDDLE
SEAT (if equipped) TO A LOAD
FLOOR POSITION – To fold the
seat, pull the lever (Lever 3)
located on the seatback to release
the folding seat latch. With the
latch released, the seatback can
be lowered into the load floor
position. A moderate force may be
required to move the seat forward
and down
.
RETURNING THE 20% MIDDLE SEAT TO THE UPRIGHT POSITION FROM THE FULLY-
LOWERED FLOOR POSITION – To return the seat to the upright position, lift and pull the
seatback until the seat latch is fully engaged.
POWER LIFTGATE OPERATION – To open the power liftgate, push the button on the instrument
panel (Figure A), press on your five-button key fob, or press and release the control button
located on the liftgate (Figure B). The power system will take over when you release the button.
To close the liftgate, press and release the control located in the left rear quarter panel (Figure C)
or press on your five-button key fob. Keep clear of the liftgate when operating the rear
switch. To unlatch the liftgate window, push the button (Figure D) on the left side of the liftgate
above the license plate or press on your five-button key fob. Do not open the liftgate or the
liftgate window in a garage or other enclosed area with a low ceiling. To close, make certain the
rear window is closed, and then pull down the liftgate a few inches to activate power closing.
B
C
E
A
D
LEVER 1
LEVER 2
FIGURE C
FIGURE A
FIGURE A
FIGURE B
LEVER 3
FIGURE D
LEVER 1
PULL STRAP
POS. 1
POS. 4
POS. 2
POS. 5
POS. 3
POS. 6
*8L7J_19G217_AB*