Life Fitness TR9100 GPS Receiver User Manual


  Open as PDF
of 4
 
Life Fitness Model TR9700, TR9500, TR9100 Treadmills
How To...Replace or Install Rear Roller Guards
Tools Required: Philips Screwdriver
NOTE: The following steps are applicable to units with Configuration No. 1, Rear Roller Guards.
1. Remove the Screws securing the Rear Roller Guard Assembly to the Frame.
2. Remove the old Grommets from the Rear Roller Welded Guard Tab and Base Frame (model
specific).
3. Install the new Grommets (included in kit) in the Rear Roller Guard Weldment and Base Frame
locations.
4. Place new Roller Guard in position as shown with the top surface under walking belt. Align mounting
holes.
Roller Guard to be
located between belt
and deck
Align mounting holes
with grommet holes
Cover Guard
Roller Guard, RT
Roller Guard, LT
Screw
Grommet
Screw
Grommet
Configuration No. 1
next