Lenmar Enterprises 50L20 Automobile Battery Charger User Manual


 
Model: SOL20
PowerPort™ Solar - Portable Battery & Charger
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT
OPERATING INSTRUCTIONS FOR YOUR UNIT.
Owner’s manual
Thank you for purchasing the PowerPort Solar Portable Charger and Battery. Take the compact, lightweight
PowerPort Solar with you wherever you go and have a handy charger or rescue battery that works anywhere!
The PowerPort Solar charges your PDA, mobile phone, MP3 player, game system, or any device that can be
charged via a USB cable connection.
Included in the package you have purchased:
• PowerPort Battery / Charger
• USB charging cable
• Adapter Tips for various mobile devices
• User Manual
Caution
- Do not overcharge the PowerPort. This will shorten the life span of the device.
- Disconnect the PowerPort as soon as it is practical after the charge is complete.
- Recycle or dispose of the PowerPort properly. If disposed of in re or short–circuited, the PowerPort
may leak or explode, causing personal injury.
- When not in use, unplug the PowerPort Solar from all cables and devices.
- Do not drop.
From a USB powered port:
Attach the Mini USB adapter tip to the small end of the cable (B), and then
plug into the Mini USB port on the bottom of the PowerPort Solar.
Then plug the other end of the USB cable (A) into any powered USB port.
While charging from a powered USB port, the PowerPort’s Solar LED battery
status indicator will light up green. When the charge has been completed, the
charging LED will turn “OFF”. Once the charging indicator shows the charge
has completed, disconnect the battery from the USB power source.
Approximate time for a full charge is 2.5 - 4 hours from a USB port.
Place your PowerPort Solar in direct sunlight to start the charging process; you
will see the red charging LED if you have optimal sunlight.
The charging time depends upon the intensity of sunlight, charging times may
be longer or shorter depending upon factors such as residual battery charge
and weather conditions.
Note: A one hour charge using direct sunlight will provide enough power for a
5-10 minute phone call, and a three hour charge will provide enough power for
a 15-25 minute phone call.
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original date of purchase. Warranties are not transferable.
The warranty excludes damage resulting from accident, misuse, modication, delay or loss of use, damage to equipment or by normal wear and tear.
ALL WARRANTY REQUESTS MUST BE SUBMITTED AT: www.lenmar.com/warranty
INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED BATTERY OR THE CLAIM WILL BE DENIED.
Copy of Proof of Purchase from an authorized Lenmar Dealer must include the following:
- The company where the product was purchased
- The date of purchase
- The model number of the product purchased
- Send back the product freight prepaid (we recommend insuring the package as Lenmar will not be responsible for shipments lost or damaged in transit).
Include $10.00 payable to Lenmar Battery Solutions for processing fee for ship to address in the Continental United States.
Include $15.00 for ship to address in Hawaii, Alaska or Canada.
Send to:
Lenmar Battery Solutions
Attn: Return Department
4035 Via Pescador
Camarillo, CA 93012-5050
Use preprinted Lenmar shipping label or clearly print your RA Number on the outside of the shipping carton.
Proposition 65 Notice (California)
The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against
multiple electronics and appliance manufacturers
• WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or
other reproductive harm. Wash hands after handling.
For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.lenmar.com or call 800/424-2703 from 9AM – 5PM PST.
Charging your PowerPort Solar from a USB powered port
Charging Your Device Using Your PowerPort Solar
From Direct Sunlight
Charging PowerPort Solar
1. Plug the USB end of the cable (A) into the top of the PowerPort Solar’s USB slot
labeled “OUT” (see diagram).
2. Choose the appropriate adapter tip for your device and attach it to the small end
of the cable (B).
3. Connect the adapter tip to your device.
4. Your device should indicate that it is receiving power. PowerPort Solar’s
“Powering Device” LED will be blue while charging a device.
5. If you are using the PowerPort Solar to recharge your device, be sure to
disconnect as soon as possible after your device is recharged to conserve the power
in the PowerPort Solar, and to avoid overcharging your device’s battery.
Note: * While charging from the sun, the LED light turns RED. The LED will indicate
RED when the sun is strong enough to charge PowerPort Solar. It is normal for the
PowerPort Solar to become warm during charging or use.
Input: 5V400mA
Output: 5.5V 800mA(max)
Charge Time: Approx. 2.5-4 hrs.
Charge current: .5A max.
Voltage: 3.7 VDC
Capacity: 2100mAh
Wh: 7.7
Chemistry: Lithium-Polymer
Weight: 82g
Dimensions: 114 x 57 x 13mm
LED Status
Specications
310-554-29-0915 r1 y1
Lithium-Polymer battery must be
recycled or disposed of properly.
MINI-USB
“IN”
USB
“OUT”
(B)
(A)
USB
USB End
of Cable (A)
Small End
of Cable (B)
Adapter Tip
Red - Solar Charging*
Green -USB Charging
No LED - Fully Charged
Blue - PowerPort Solar is charging a device
No LED - Fully Drained
Note: You may charge additional devices with your existing USB cable.
IN
OUT
CHARGING POWERING
Optimal charging from direct sunlight.
CHARGING
POWERING
IN
OUT
IN
OUT
CHARGING POWERING
LED Status
IN
OUT
CHARGING POWERING
Diagram:
USB
“OUT”
(B)
(A)
Note: Prior to initial use, fully charge your PowerPort Solar before connecting to your device.
Powering Device with PowerPort Solar