KTM 125 EXC, EXC SIX DAYS, 200 XC, XC-W, EXC, 250 XC, XC-W, EXC, EXC SIX DAYS, 300 XC, XC-W, EXC-E, EXC-E SIX DAYS Motorcycle User Manual


 
ENGLISH
38
Replacing the headlight lamp/parking light lamp
Loosen both rubber bands and tilt the headlight mask to the front. Pull the
parking light lamp with holder [3] carefully out of the reflector. Pull
connector [4] off the headlamp and remove rubber cap [5]. Disengage retain-
ing clip and take the bulb out of the reflector. When changing the parking-
light lamp, simply pull it out of the holder.
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.
Replacing the battery of the digital speedometer
Remove the headlight mask and disassemble the electronic speedometer.
Remove the screw connection [A], insert the battery (type Duracell CR 2430)
with the writing facing up and reinstall the screw connection.
Checking spoke tension
The correct spoke tension is very important for the stability of the wheels and
thus for riding safety. A loose spoke causes the wheel to become
unbalanced and before long other spokes will have come loose. Check spoke
tension, especially on a new motorcycle, at regular intervals. For checking,
tap on each spoke with the blade of a screwdriver (see photo). A clear tone
must be the result. Dull tones are indicators of loose spokes. If necessary,
have the spokes retightened and the wheel centered by a KTM dealer.
Spokes can tear if you continue to ride with them loose. This may lead to
an unstable handling of your motorcycle.
Excessively tensioned spokes may rupture due to local overloading.The
spokes must be tensioned to 5 Nm.
MAINTENANCE WORK ON CHASSIS AND ENGINE »
3
5
4
4
A