KTM 50 SX PRO SENIOR LC Motorcycle User Manual


 
ENGLISH
27
Checking the gear oil level
To check the gear oil level, first remove the plug 1. With the motorcycle
parked in an upright position, a small quantity of oil should flow out of the
indicator opening
2. If oil must be added, tilt the motorcycle and pour
automatic gear oil ( Shell Donax TA) into the bore.
!
CAUTION
!
L
ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
T
HEREFORE, ONLY USE BRANDED PRODUCTS (SHELL Donax TA).
Changing gear oil *
The engine must be warmed up before changing the gear oil. Park the
motorcycle on a horizontal surface, remove the oil drain plug
3 and drain
the used oil into an appropriate container. Clean the sealing surface, mount
the oil drain plug together with the gasket and tighten to 15 Nm.
Remove stopper
4 and fill in 0.15 liters of automatic gear oil (Shell Donax
TA). Mount the stopper and check the engine for tightness.
!
CAUTION
!
L
ESS OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR.
T
HEREFORE,
ONLY USE BRANDED PRODUCTS (SHELL Donax TA).
1
2
3
4