KTM 450 EXC-R EU, 450 EXC-R AUS/UK, 450 EXC-R SIX DAYS, 450 EXC-R USA, 450 XCR-W UsA, 450 XCR-W ZA, 530 EXC-R EU, 530 EXC-R AUS/UK, 530 EXC-R SIX DAYS, 530 EXC-R USA, 530 XCR-W USA, 530 XCR-W ZA Motorcycle User Manual


  Open as PDF
of 125
 
MAINTENANCE WORK ON CHASSIS AND ENGINE 42
100023-11
(EXC-RbEU, EXC-RbAUS/UK, EXC-RbUSA, XCR-WbZA)
ದ Loosen screwb
. Remove the fork leg on the left.
ದ Loosen screwb
. Remove the fork leg on the right.
Installing the fork legsbx
100021-10
ದ Check parts for damage and wear. Replace damaged or worn parts.
ದ Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position the bleeder screwb
to the front.
500094-11
(EXC-RbSIXbDAYS, XCR-WbUSA)
ದ Fully tighten screwb
.
Specification
Screw, top triple clamp M8 17bNm
(12.5blbfbft)
ದ Fully tighten screwb
.
Specification
Screw, bottom triple clamp M8 12bNm
(8.9blbfbft)
100023-10
(EXC-RbEU, EXC-RbAUS/UK, EXC-RbUSA, XCR-WbZA)
ದ Fully tighten screwb
.
Specification
Screw, top triple clamp M8 20bNm
(14.8blbfbft)
ದ Fully tighten screwb
.
Specification
Screw, bottom triple clamp M8 15bNm
(11.1blbfbft)
500093-11
ದ Position brake caliper, mount and tighten screwsb.
Specification
Screw, front brake caliper M8 25bNm
(18.4blbfbft)
Loctite
®
243™
ದ Fit cable clipb
.
ದ Position the brake line and cable harness. Put the clamp on, mount and tighten
screwsb
.
ದ Fit front wheel. ( P. 64)
 previous next